December 2014
Used 17.7 X, 22.8 Y, 15.7 Z, DMG HSC 55 linear, One used 2008/2011 DMG DECKEL MAHO HSC 55 linear 5-Axis   Machining                                                   UED

Y Franke & Company LLC
N112 W16298 Mequon Rd #347
Germantown WI 53022
Tel: 847-987-1607 Fax:
york@yfranke.com  www.yfranke.com

17.7"X, 22.8"Y, 15.7"Z, DMG HSC 55 linear, One used 2008/2011 DMG DECKEL MAHO HSC 55 linear 5-Axis Machining [063807]

One used 2008/2011 DMG DECKEL MAHO HSC 55 linear 5-Axis Machining Center:

See VIDEO of 110 rpm Rotary Swivel Table at:

http://youtu.be/qz5ssQqXaVg

See VIDEO of 5-Axis High Speed Cutting on a HSC55 at:

http://youtu.be/MwZCuTlSKeY


Made in Seebach, Germany

Build Date..................................................... 07/2008

Installation Date.............................................. 02/2011

Hours Approximately 10,111 power on and 2,715 spindle on hours total !

TECHNICAL DATA:
HSC-Precision Centre HSC 55 linear in Bridge Type design

NEW DMG Design

CONTROL:
3D-Control Heidenhain iTNC 530
Operator screen SmarT.NC
DMG ERGOline Control, 19" display
Options on the control:
Electronic handwheel
Ethernet Data lines and adapter
Application Tuning Cycle ATC-Software selection of the optimal milling
mode for the current machining

WORKING AREA:
X-Axis.................................................. 17.7" (450 mm)
Y-Axis.................................................. 22.8" (580 mm)
Z-Axis.................................................. 15.7" (400 mm)
C-Axis...................................... 360 degrees Rotation Range
A-Axis.................................. 10/-110 degrees Tilting range
Distance spindle nose to table.............. 4.1"-19.8" (105 mm-505 mm)
Clamping area trunion table............ 15.7" x 15.7" (400 mm x 400 mm)
Maximum table load.................................... 440 lbs (200 kg)
Table has absolute measuring systems including permanent cooling of A and
C-axis motors

MAIN DRIVE:
Drive............................... Digital controlled AC-Motorspindle
Spindle speed range...................................... 20-18,000 rpm
Spindle taper........................................ HSK-A63 DIN 69893
Spindle power 40/100C............... 54.98 hp/40.23 hp (41 kW/30 kW)

TOOL MAGAZINE:
Chain with double gripper with linear axis for pickup-change
Tool changer and tool magazine integrated in machine cabin
Magazine places............................................. 30 pockets
Maximum tool diameter...... 3.14" (80 mm) with free neighboring pockets
Maximum tool length..................................... 9.84" (250 mm)
Maximum tool load...................................... 13.2 lbs (6 kg)

FEED DRIVES:
Drive..... Linear motors in X, Y, Z-axis, Torque motors in A and C-axis
Feed rate............ X, Y and Z-axis maximum 3,150 ipm (80,000 mm/min)
Rapid feed...................... X, Y, and Z-axis 262 ft/min (80 m/min)
Rapid feed A-axis.............................................. 110 rpm
Rapid feed C-axis.............................................. 110 rpm
Acceleration.................................................. Up to 2g
Clamping torque rotary axis.................... 1,475 ft/lbs (2,000 Nm)
Clamping torque swivel axis.................... 1,475 ft/lbs (2,000 Nm)

GUIDEWAYS:
Roller guide ways in all linear axis
X-axis.................... Size 1.77" (45 mm), distance 16.53" (420 mm)
Y-axis.................... Size 1.37" (35 mm), distance 35.00" (890 mm)
Z-axis.................... Size 1.37" (35 mm), distance 12.59" (320 mm)

LINEAR MEASURING SYSTEM:
System.......... Direct absolute X/Y/Z Axis, absolute encoders A/C Axis
Input resolution................................ 0.0000039" (0.0001 mm)

MEASURING:
BLUM Laser Tool Measuring for tool length and diameter

Renishaw OMP 60 infrared touch probe

Machine preparation for use of the 3D quickset Toolkit

Signal lamp, 4 colours

COOLING MEDIA/CHIP REMOVAL:
Scraper type chip conveyor, discharge height 37.4" (950 mm)

High Pressure Air blast through spindle centre, activated by M function
and softkey, maintained air with a light lubrication

Working area flushing, including door flushing pipe, with rotating
clear-view window

6 nozzles for outer coolant supply, delivery rate approximately 36.25 psi
(2.5 Bar) at 10.56 gallon/min (40 l/min).
Coolant tank capacity 39.62 gallon (150 l)
Coolant-airblast changeover (6 nozzles for coolant, 4 nozzles air blow)

CENTRAL LUBRICATION:
Automatic minimum lubrication for roller guideways

ELECTRICAL CABINET:
With active cooling unit

WORKING HOUR RECORDING:
On the electrical cabinet for control voltage on and programme run-time

CABIN:
Full cabin with sliding door
DMG LIGHTline provides optimal visibility of the machine status

MACHINE LAMP:
Planon-light

MACHINE WEIGHT:
Approximately 20,943 lbs (9,500 kg)

EQUIPPED WITH:
Active chiller for main spindle and linear drives

Active chiller for electrical cabinet

Direct absolute measuring system with air purge

Coolant-airblast changeover

TERMS:
Payment in full via wire transfer prior to removal.

Subject to terms and conditions of FRANKE Sales Contract.


For information on a specific piece of equipment, please contact the selling dealer directly.

UED-ed is published by
Used Equipment Directory 400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com, Tel: 973-400-1790 Fax: 973-625-8933