Jordan Craig Machy Int'l LLC
PO Box 737
New City
NY
10956-0737
Tel: 845-398-0073
Fax: 845-398-0074
jc@jordancraigmachinery.com www.jordancraigmachinery.com
22 T, Amada,Apelio III 2510V, 2000W Hyd Turret/Laser Combo w/Fanuc 160IL CNC MFG: 1999
[8895]
Motion Package: Travel Method: X and Y axes work piece movement
Control Method: X, Y, Z, T, B, & C Simultaneous 3 axis control
Drive Motors: Fanuc AC Servo (X, Y, Z, T, B, C)
Maximum Sheet Size: 50" (Y) x 196" (X) with one repositioning cycle
Maximum Axis Travel: 50.0" (Y) x 98.4" (X) 11.8" (Z)
Max. Cutting Speed (laser): 590"/min.
Max. Linear Table Speed: 3937 "/min. (X) 3149 "/min. (Y)
Max. Speed - Z-Axis: 1574 "/min.
Positioning Accuracy: 0.002" / 39.37"
Maximum Work Thickness: 0.250"
Maximum Workpiece Weight
110 LB at F1 (maximum axis speed)
330 LB at F4 (slowest axis speed)
Punching System
Press Capacity: 22 Tons
Max Press Speed: 1000 SPM
Hit Rate (1" move):
X 340 Y 280 HPM (0.315" stroke, 1" move)
X 410 Y 380 HPM (0.315" stroke, 0.315" move)
Maximum Hole Diameter: 3.5" (max punch size - unlimited with laser)
Tool Type: Amada Thick Turret
Turret Rotation Speed: 35 RPM
Auto-Index Speed: 60 RPM (F1, F2)
Turret Capacity: 31 Stations (3 auto-index)
Turret Specification:
19 - " stations (8 keyed)
6 - 1" stations (6 keyed)
1 - 2" station (keyed)
2 - 3" stations (2 keyed)
2 - 1" auto-index stations
1 - 2" auto-index station
CNC Controller
Model: Fanuc 160iL - 32 bit
Control Function: X, Y, Z simultaneous 3 axis, plus Laser Power control (CW,
Pulse), T, B & C axis.
Input Method: Floppy Disc, MDI, Edit, DNC
MMC Functions: Geometric Input (metric only), Maintenance
Minimum Command Unit: 0.0001" (X, Y, Z) 0.001 degrees (C)
Operating Modes: Automatic, MDI & Manual
Display Modes: Program Contents, Position Information, Program Check,
Settings, Parameters,
Tool Diameter Compensation, Assist Gas Status, Self Diagnostics
Interlock Displays: Water Volume, Water Temperature, Gas Pressure, Vacuum
Leak, Blower Malfunction, Shutter Power, Discharge, Assist Gas, Door Open
Electrical Requirements: 200 VAC, 3 Phase, 60 HZ, 20 KVA
For information on a specific piece of equipment, please contact the selling dealer directly.
UED-ed is published by
Used Equipment Directory
400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
