Jordan Craig Machy Int'l LLC
PO Box 737
New City
NY
10956-0737
Tel: 845-398-0073
Fax: 845-398-0074
jc@jordancraigmachinery.com
www.jordancraigmachinery.com
24", Amada, No. IBT-610, Wet/Dry Deburring Machine, MFG: 1999, Installed New: 2003
[8271]
Amada's IBT-610 wet/dry deburring machine is compact and offers a small
footprint at 60" long x 47" wide x 58" high. The IBT-610 uses a wheel instead
of the traditional belt and is able to debur a wide range of different
materials including galvanized and pre-coated parts without damaging the
coating.
The IBT-610's process includes deburring, squeegee and air blowing. The parts
dryer is incorporated into the machine along with a self-contained filtration
system, which eliminates airborne dust and reduces fire hazards. All internal
parts of the machine, including reusable filters, are made of stainless steel
to eliminate water-induced corrosion.
"The IBT-610 is Amada's answer to our customers' requests for wet/dry
performance in one compact unit. We believe that this machine will meet their
needs and deliver significant reductions in labor costs as well as unmatched
efficiency and quality." said Mark Ellis, assistant manager, Amada Shearing
Division.
The IBT-610 utilizes a wheel instead of a belt. The wheel remove burrs, rounds
edges and penetrates into holes. Normal wheel life is 3-6 months depending on
the application and the degree of the burrs. A typical wheel change takes
under five minutes. This minimizes down time.
Amada and 3M offer several wheels to handle a wide range of materials and
applications. The 3M wheels range from a finishing wheel to an aggressive
extra coarse wheel designed for stripping applications. A specially designed
composite wheel from Amada is able to deburr galvanized and pre-coated
materials. The machine is also able to debur flat parts with formed features
(up to 0.200" high) such as extrusions, card guides, and dimples, utilizing a
optional brush wheel.
A number of other features enable quality production from the IBT-610. The
reusable stainless steel filter eliminates the expense associated with
replacing paper filters. An acrylic window makes it easy to preview work in
progress. The machine's control allows the operator to adjust the height of
the wheel, thereby controlling the depth of the cut. An amp meter "kill"
switch turns the machine "off" when it senses an overload condition on the
wheel and motors, preventing damage to the machine.
Sheet thickness for the IBT-610 is 0.02"-0.200" and maximum sheet width is
24". The work piece feeding speed is 0-200 ipm.
UED-ed is published by
Used Equipment Directory
45 Eisenhower Dr 5th Fl, Paramus NJ 07652
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 201-845-2452 Fax: 201-845-2496
|
