Liberty Machinery Company
111 Schelter Rd
Lincolnshire
IL
60069-3603
Tel: 847-276-2761
Fax: 847-276-2762
sales@libertymachinery.com
www.libertymachinery.com
1/4" x 1-3/4", Kinefac, No. MC-10F,Rod to 1-3/4",Worm Rolling to 1-1/4",1987
[22813]
Serial No. 546R New - 1987
SPECIFICATIONS:
Die Drive Horsepower 10 HP
Die RPM - Minimum 155 RPM
Die RPM - Maximum 558 RPM
Spindle Diameter 2"
Die Length to 4 1/2"
Die Diameter Range 3 3/4" to 5"
Skew Range +/- 10 Degrees
Key 3/8"
Die Center Distance Range 4" to 6 3/4"
Die Width- Maximum 2 1/2"
High Speed In-Feed Rolling Die Acutation Rate 120 Parts/Minute
Applicable Radial Die Load - Maximum 57,600 LBS.
Primary Operations - Thru-Feed and Cut Off:
Simple Shafts and Pins 1/16" x 3/4" Long to
1/4" x 1 3/4" Long
Ball Blanks 1 mm to 1/4" Diameter
Roller Blanks 1/16" x 1/2" Long to
1/4" x 1 1/2" Long
Bar Processing - Thru-Feed - Unlimited Length:
Threaded Rod up to 1 3/4" Diameter
Worm Rolling up to 1 1/4" Diameter x
16 Diametral Pitch
Annular Forms up to 1 3/4" in Diameter
Knurled or Shallow Finned Bar up to 1 3/4" in Diameter
Secondary Rolling Operations - In-Feed:
UNC Threads to 1 1/2" Diameter x
3 1/2" Long
UNF Threads to 2" Diameter x 4 1/4" Long
Worms to 1 1/2" Diameter,
12 Diametral Pitch x
2 1/2" Long
Knurls and Shallow Involute Forms to 2 1/2" Diameter x
4 1/2" Long
Annular Forms to 3" Diameter, depending
on depth and length of form
Roll Finishing and Denicking:
Thru-Feed to 1 3/4" Diameter and
Unlimited Length
In-Feed to 3 1/2" Diameter and
4" Long
Roll Straightening:
Thru-Feed to 3/4" Diameter
EQUIPPED WITH:
Kine-Mat Shaft Feeder
Skewable Spindles Capable of Thru-Feed or In-Feed Work
Reversing Switch for Die Rotation
Rotary Die Matching for Phasing of Dies
Step Adjustable Speed
Blade Support Systems
Double Acting Arm Control System
Hydraulic Actuation (5 HP, 5 GPM Power Pack)
38 Gallon Coolant System
Worklight
*Preliminary Specifications Subject to Verification.
UED-ed is published by
Used Equipment Directory
400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
