Liberty Machinery Company
111 Schelter Rd
Lincolnshire
IL
60069-3603
Tel: 847-276-2761
Fax: 847-276-2762
sales@libertymachinery.com
www.libertymachinery.com
40"X,20"Y,25"Z,Tree VMC 1050/40,DynaPath Delta 30 Autocon CNC,40TPR,8000RPM,1994
[20450]
Serial No. 9-20-93-1071 New - 1994
SPECIFICATIONS:
Table Size 50" x 23.8" (1,270 mm x 605 mm)
Floor to Table Surface - Maximum 37.4" (950 mm)
- Minimum 36.6" (903 mm)
T-Slots (5) Width x Span 0.708" x 4.92" (18 mm x 125 mm)
Maximum Weight on Table 2,000 Lbs. (910kg)
Travel - Longitudinal (X-Axis) 40" (1,016 mm)
- Cross (Y-Axis) 24" (610 mm)
- Vertical (Z-Axis) 25" (635 mm)
- Spindle Nose to Table 3.9" - 28.9" (100 mm - 735 mm)
- Spindle Center to Column 25" (635 mm)
Cutting Feed Rate (X/Y/Z) 0.01 - 200 IPM (0.25 - 5,080 mm/Min.)
Rapid Feed Rate (X/Y/Z) 787 IPM (20 m/Min.)
Axis Thrust (X/Y/Z) X/Y - 1,679 Lbs., Z - 2,500 Lbs.
Ball Screw Size 1.575" (40 mm)
Spindle Main Motor 15/20 HP (11.2/15 kW)
Spindle Speeds (2 Ranges) - Low 20 - 2,000 RPM
- High 2,001 - 8,000 RPM
Spindle Orientation Electricl, 0-360 Deg. Programmable
Spindle Taper CAT 40
ATC - Number of Tools 2 x 20 (Optional)
ATC - Tool Selection Bi-Directional, Servo Driven
Max. Tool Diameter - w/Adjacent Tools 3.54" (90 mm)
- w/o Adjacent Tools 6.30" (160 mm)
Maximum Tool Length 11.8" (300 mm)
Maximum Tool Weight 17.5 Lbs. (8 kg)
Machine Width x Depth with Doors Closed 108.3" x 83.5" (2,750 mm x 2,120 mm)
Machine Height 115" (2,920 mm)
Approximate Machine Weight 16,975 Lbs. (7,700 kg)
EQUIPPED WITH:
DynaPath Delta 30 Autocon CNC Control with Remote Pulse Hand Wheel Control
(2) 20 Station Tool Carousel
Rigid Tapping
Chip Auger
Coolant System
Full Enclosure
*Preliminary Specifications Subject to Verification.
UED-ed is published by
Used Equipment Directory
45 Eisenhower Dr 5th Fl, Paramus NJ 07652
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
