Liberty Machinery Company
111 Schelter Rd
Lincolnshire
IL
60069-3603
Tel: 847-276-2761
Fax: 847-276-2762
sales@libertymachinery.com www.libertymachinery.com
No. A21/2, Mikron,Bowl Feed, 1.6" Max Dia., Stack/Load Attachment, 1980
[18446]
Serial No. 956-71-80-005/501 New - 1980
SPECIFICATIONS:
Maximum Diameter that can be Hobbed @ 24 mm (.95") 40 mm (1.6")
Travel of Hob - Maximum 40 mm (1.6")
Length that can be Clamped - Maximum 75 mm (2.96")
Swivelling Range of Hob Spindle - Maximum +/- 6 Degrees
Axial Displacement of Hob Spindle - Maximum 10 mm (0.4")
DP in Steel - Maximum 20,3
Number of Teeth with Normal Indexing Gear Train 5 - 399
Number of Teeth with Special Indexing Gear Train 3 -240
Number of Teeth with Special Indexing Gear Train 25 - 3200
Horizontal/Vertical Feeds Inf. Variable between 0-15mm/sec (0.-59")
Hob Speed in Geometric Progression between 400 - 4800 RPM
Electrical 440 V, 3 PH, 60 Hz
Approximate Weight 650 kg (1,433 Lbs.)
Approximate Dimensions 840 x 1025 x 1350 mm
33" x 40.4" x 53.2"H
Motors:
Main Motor (m 3) 1,1 kW (3600 RPM)
Hydraulic System Pump (m 1) 0,18 kW (1800 RPM)
Coolant Pump (m 2) as Required 0,06 kW (3600 RPM)
0,11 kW (3600 RPM)
Tension Volts
Frequency Cycles
EQUIPPED WITH:
Mikron Type 90 Fully Automatic Stacking & Loading Attachment
Deburring Attachment
SPECIFICATIONS FOR STACKING & LOADING ATTACHMENT:
Power Input 70 W
Capacity of the Pot for Blanks 2, 5 - 10 mm Diameter 0,25 litre
Capacity of the Pot for Blanks 10 - 20 mm Diameter 0,8 litre
Blank Diameter - Maximum 20 mm
- Minimum 2,5 mm
Blank Thickness - Maximum 1/2 Workpiece Diameter
- Minimum 0,04 mm
Length of Stack - Maximum 20 mm
Number of Blanks per Stack Depends on Stack Length
Loading Time 3 Seconds
*Preliminary Specifications Subject to Verification.
For information on a specific piece of equipment, please contact the selling dealer directly.
UED-ed is published by
Used Equipment Directory
400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
