Liberty Machinery Company
111 Schelter Rd
Lincolnshire
IL
60069-3603
Tel: 847-276-2761
Fax: 847-276-2762
sales@libertymachinery.com
www.libertymachinery.com
No. A24/1, Mikron,Bowl Feed,1.8" Max Dia., Stack/Load Attachment,1980 (2)
[18444]
Serial No. 956-71-80-160 New - 1980
SPECIFICATIONS:
Maximum Diameter that can be Hobbed @ 24 mm (.95") 20 mm (.79")
Maximum Diameter that can be Hobbed @ 18 mm (.71") 46 mm (1.8")
Travel of Hob - Maximum 50 mm (1.97")
Length that can be Hobbed - Maximum 45 mm (1.77")
Length that can be Clamped - Maximum 75 mm (2.96")
Distance between Work Arbor & Tailstock Spdl. - Max. 110 mm (4.34")
- Min. 30 mm (1.19")
Swivelling Range of Hob Spindle - Maximum +/- 5 Degrees
Axial Displacement of Hob Spindle - Maximum 10 mm (0.4")
Sinking of the Hob Spindle 20 mm (.79")
DP in Steel - Maximum 25.4
Number of Teeth with Normal Indexing Gear Train 5 - 399
(7) Hob Speeds w/Geometric Progressive Ratio of 1.26 400 - 3200 RPM
Axial Feed (Mechanic) per Workpiece Revolution .002" - .024"
0,05 - 0,62 mm
Radial Feed (Hydraulic) per Minute 0 - .591"
0 - 15 mm
Electrical 440 V, 3 PH, 60 Hz
Approximate Weight 460 kp (1,014 Lbs.)
Motors:
Main Motor 0,75 HP (3000 RPM)
1500 if required
Hydraulic System 0,25 HP (1500 RPM)
Coolant Pump 0,12 kW (3000 RPM)
Tension Volts
Frequency Cycles
EQUIPPED WITH:
Mikron Type 90 Fully Automatic Stacking & Loading Attachment
Deburring Attachment
SPECIFICATIONS FOR STACKING & LOADING ATTACHMENT:
Power Input 70 W
Capacity of the Pot for Blanks 2, 5 - 10 mm Diameter 0,25 litre
Capacity of the Pot for Blanks 10 - 20 mm Diameter 0,8 litre
Blank Diameter - Maximum 20 mm
- Minimum 2,5 mm
Blank Thickness - Maximum 1/2 Workpiece Diameter
- Minimum 0,04 mm
Length of Stack - Maximum 20 mm
Number of Blanks per Stack Depends on Stack Length
Loading Time 3 Seconds
*Preliminary Specifications Subject to Verification.
UED-ed is published by
Used Equipment Directory
45 Eisenhower Dr 5th Fl, Paramus NJ 07652
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 201-845-2452 Fax: 201-845-2496
|
