R P Machine Enterprises Inc
820 Cochran St
Statesville
NC
28677-3731
Tel: 704-872-8888
Fax: 704-872-5777
sales@rpmachine.com www.rpmachine.com
Wanderer, No. GF345, Siemens 840D, Wanderer Model GF-345 CNC Hobbing and Milling Machine
[2401]
24-25-30-2*40-45-50-55-60-65-70-75-2*80-85-90-95-100-110-120-125-127
Protective Systems
*main drive motor IP 23
*feed motors IP 54
*switch cabinet IP 54
*NC control cabinet IP 54
*operation panel IP 54
*ambient temperature deg C 10-40
deg F 50-104
*relative air humidity %ax 95
Radial Milling Head
*speed range 45-5000 rpm
*full power (22kW) at a speed higher than 295 rpm
*max. torque (680 Nm) in the range 45-295 rpm
*spindle diameter at front bearing 3.93"
*tool taper acc. to DIN 2079 7/24 50
*for tool shaft acc. to DIN 2080
*with rentention knob acc. to DIN 69872-24
*hydro-mechanical tool clamping
*draw-in force N 20000
Tailstock
*with full quill guide and manual clamping to the bed guideways
*center height 16.53"
*tailstock displacing is supported aerostatic
*quill taper MK 5
*quill diameter 3.54"
*quill stroke 6.29"
*quill displacing by use of handwheel
-include one center point
Coolant System
*for external coolant supply through flexible hose
*tank volume I 400
*immersion coolant pump manufacturer Brinkmann
*type TB 305-470
*installed power 2.6 kW
*conveying capacity (oil/emulsion) l/min max 250
Chip Removal
*chip conveyor 1 1/4"
*manufacturer USB
*installed power 0.75kW
*conveying capacity kg/h max 150
*ejection height above floor 47.24"
*including brush with reverse rotation at the chip ejector
*excl. chip carriage
Protection Devices
*Chips and splash protection by sliding doors, electrically secured
located in front of the machine bed, convering the full milling length.
The doors are to be opened and closed manually.
Height 82.67"
Protective gratting is located at the rear area for the full machine
length, connected to the side area of the machine, with an electrically
protected sliding door for maintenance work at the machine and for
operating the main drive unit.
*height of the protective gratting 82.67"
*height of the sliding door 82.67"
Hydraulic Data
machine hydraulic
at the main gear unit acc. to VDI 3230
*manufacturer HAWE
*container volume I 0.9
*operating pressure bar 150
*conveying capacity l/min 0.87
Hydraulic Dampening Device
*at the work spindle head
*manufacturer HAWE
*container volume I 0.9
*operating pressure bar 150
*installed power kW 0.45
Pneumatic Data
Compressed Air
*acc to VDI 3229
*connection bar 5
*consumption m3h approx 6
Lubrication
Automatic Central Lubrication
*for the guideways
*with timer and metering orifices
*acc.to DIN 5170
*manufacturer Vogel fluidtech
Oil Circulating Lubrication
*for gear lubrication of the radial milling head
*and the ZF gearbox
*with oil recooling aggregate
*acc. to DIN 5170
*manufacturer Womer
Oil Circulating Lubrication
*for gear lubrication in the work spindle head
*acc. to DIN 5170
*manufacturer Willy Vogel
Electrical Data
Installation
*acc to VDE 0113
*operating voltage V 400
*socket voltage V 230/110
*control voltage VDC 24 VAC 230
*voltage tolerance 10/5
*frequency Hz 60
*valve control voltage DC V 24
*cross sectional area fo conduction 1.35"
*pre-connected fuse A 80
*installed capacity kVA approx. 50
Switch Cabinet
*with air conditioning
*for ambient temperature deg C - 40
deg F - 104
*dimensions (H x W x D ) 78.7"x141.7"x23.6
*switch cabinet cable supply-conduit box under floor
Control Panel
*complete with monitor, is arranged in front of the machine bed and can travel over the whole machin
ng length with flexible cable connection
Machine Net Weight, Approx. 39,656 lbs
Misc
*Lots of Tooling
For information on a specific piece of equipment, please contact the selling dealer directly.
UED-ed is published by
Used Equipment Directory
400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
