R P Machine Enterprises Inc
820 Cochran St
Statesville
NC
28677-3731
Tel: 704-872-8888
Fax: 704-872-5777
sales@rpmachine.com www.rpmachine.com
G&E, No. 160H, Fanuc 16M, G&E Model 160H CNC Hobber/Gasher, Fanuc 16M 4 Axis, 192" Dia, 5
[2717]
External Gashing Capacities
Maximum Gear OD w/16" Diameter Cutter 188"
Minimum Gear OD w/16" Diameter Cutter 37"
Maximum Gear Pitch .75 DP
Maximum Gear Face (30 degrees H.A) 52"
External Hobbing Capacities
Maximum Gear OD (w/12" Diameter Hob/1DP) 192"
Minimum Gear OD (w/12" Diameter Hob/1DP) 41"
Maximum Gear Pitch Hobbing 1DP
Maximum Gear Face (30 degrees H.A. w/12" Dia Hob) 52"
Hobbing Head:
Maximum Cutter Diameter - Gashing 16"
Maximum Hob Diameter - Hobbing 12"
Arbor Diameter - Gashing 3.0"
Arbor Diameter - Hobbing 2.0"
Spindle Speeds - Variable 0-175 rpm
Cutter Spinle Horsepower 50 HP
Constant Horsepower 60 rpm
Constant Torque 0-60 rpm
Axis Limits (External Head)
x-Axis - CL Table CL Spindle 102" max
x-Axis - CL Table CL Spindle 26.5"/min
z-Axis - Table Top CL Spindle 78.0" max
z-Axis - Table Top CL Spindle 26.0" min
w/External HD Rotated CCW (bull gear down) 38.0" min
w/External HD Rotated CW (bull gear up) 28.0 min
Worktable Diameter 102" max
Worktable Hole Diameter 32" max
Machine Weight 75 Ton
Table Load Capacity 80,000 lbs
Floor Space Required 39'x18" 3.5
Maximum Machine Height Required 16'6"
Machine is Equipped with the Following:
* Single stachion with base, table group, and cutter slide
* Fanuc 16M 4 Axis controller
* G&E external gashing/hobbing head
* Mechanical head swivel to set hob angle
* Mechanical cutter shift
* Chilling System for Head
* Chip Conveyor System
* Full compliment of hob and gashing arbors
* Miscellaneous Tooling
* Documention (electrical, hydraulics)
Control Features:
* C-Axis work table rotation
* X-Axis radial infeed
* Z-Axis axial feed
* A-Axis cutter rotation
* Custom Macro screens for easy conversational programming
* One to three cuts can be selected
* Crowning amounts are input by the desired amount on the flank of the gear
* Single index Milling
* Spur and helical hobbing
* Part programs can be stored in nonvolatile memory with up to 15 characters
* RS-232, and S Ram communication ports
GENERAL TERMS AND CONDITIONS:
Transportation:
* Machine is sold EX Works
* Export packing included
* CIF quotes available upon request.
Runoff Criteria:
* Machine is currently under power ready for inspection
Installation and Training:
* International installation will be quoted at additional cost. The customer is responsible for mach
ne foundation, rigging machine in place and supplies all hook ups to power, air, and water. The fact
ry service engineer completes installation with customer supplied assistance. The factory service en
ineer completes demonstration of the machine run-off, capabilities and operator instruction for a pe
iod of not to exceed 20 working days.
Validity:
* This quotation is valid for 30 days and subject to availability
Payment:
50own payment with purchase order
50%rior to loading
Machine Specifications:
External Gashing Capacities 0.00 m - 0.00 m - 0.00 m 188"
Minimum Gear OD w/406.40 mm Diameter Cutter 939.80 mm
Maximum Gear Pitch .75 DP
Maximum Gear Face (30 degrees H.A) 1,320.80 mm
External Hobbing Capacities 0.00 m - 0.00 m - 0.00 m 192"
Minimum Gear OD (w/304.80 mm Diameter Hob/1DP) 1,041.40 mm
Maximum Gear Pitch Hobbing 1DP
Maximum Gear Face (30 degrees H.A. w/304.80 mm Dia Hob) 1,320.80 mm
Hobbing Head:
Maximum Cutter Diameter - Gashing 406.40 mm
Maximum Hob Diameter - Hobbing 304.80 mm
Arbor Diameter - Gashing 76.20 mm
Arbor Diameter - Hobbing 50.80 mm
Spindle Speeds - Variable 0-175 rpm
Cutter Spinle Horsepower 50 HP
Constant Horsepower 60 rpm
Constant Torque 0-60 rpm
Axis Limits (External Head) 0.00 m - 0.00 m - 0.00 m - 0.00 m - 0.00 m 2,590.80 mm x 0.00 mm 673.10
m / 0.00 mm
z-Axis - Table Top CL Spindle 1,981.20 mm x 0.00 mm
z-Axis - Table Top CL Spindle 660.40 mm
w/External HD Rotated CCW (bull gear down) 965.20 mm
w/External HD Rotated CW (bull gear up) 28.0 min
Worktable Diameter 2,590.80 mm x 0.00 mm
Worktable Hole Diameter 812.80 mm x 0.00 mm
Machine Weight 75 Ton
Table Load Capacity 36,287.39 kg
Floor Space Required 11.89 m
Maximum Machine Height Required 50.60 m
Machine is Equipped with the Following:
* Single stachion with base, table group, and cutter slide
* Fanuc 16M 4 Axis controller
* G&E external gashing/hobbing head
* Mechanical head swivel to set hob angle
* Mechanical cutter shift
* Chilling System for Head
* Chip Conveyor System
* Full compliment of hob and gashing arbors
* Miscellaneous Tooling
* Documention (electrical, hydraulics)
Control Features:
* C-Axis work table rotation
* X-Axis radial infeed
* Z-Axis axial feed
* A-Axis cutter rotation
* Custom Macro screens for easy conversational programming
* One to three cuts can be selected
* Crowning amounts are input by the desired amount on the flank of the gear
* Single index Milling
* Spur and helical hobbing
* Part programs can be stored in nonvolatile memory with up to 15 characters
* RS-232, and S Ram communication ports
GENERAL TERMS AND CONDITIONS:
Transportation:
* Machine is sold EX Works
* Export packing included
* CIF quotes available upon request.
Runoff Criteria:
* Machine is currently under power ready for inspection
Installation and Training:
* International installation will be quoted at additional cost. The customer is responsible for mach
ne foundation, rigging machine in place and supplies all hook ups to power, air, and water. The fact
ry service engineer completes installation with customer supplied assistance. The factory service en
ineer completes demonstration of the machine run-off, capabilities and operator instruction for a pe
iod of not to exceed 20 working days.
Validity:
* This quotation is valid for 30 days and subject to availability
Payment:
50own payment with purchase order
50%rior to loading
For information on a specific piece of equipment, please contact the selling dealer directly.
UED-ed is published by
Used Equipment Directory
400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
