G&E, No. 60S-2, Fanuc 18i Model B, G&E Model 60S-2 New Gear Gasher, Fanuc 4-Axis, 60'' Dia, [1955]
The Gould & Eberhardt #60-S2 is suitable for the high-speed cutting/gashing of
spur gears, sprockets, pinions, and other workpieces of similar profile up
to 60" in diameter, utilizing formed high speed steel or carbide tipped
disc-type cutters up to 18" diameter.

Machine Specifications:
External Gears with Gashing Cutter Head Gashing
* Max. Gear Diameter w/support 40"
* Max. Gear Diameter w/o support 60''
* Min Gear Diameter 1.5"
* Max. Face Width 38.5''
* Max. Shift or Tangential Slide 0"
* Max. DP 1 NDP
* Max. Cutter Diameter x Width 18" x 4"
* Diameter of work table 34"
* Bore diameter of work table 10"
* Max Table Load 20,000 Lbs.
* Pitch Diameter of index gear 28''
* Index range, number of teeth Infinitely Variable
* Machine height 15-feet
* Weight of machine, Approx 20 tons
* Floor Space Required 20 ft. by 12 ft. approx.

Hydraulic Tailstock Work Ranges:
* Max Height From Table Surface 34"
* Min Height from Table Surface 8"

Heights can be adjusted based on customer part dimensions

Tailstock Features:
* Manual Retract
* Hydraulic Positioning via M code in Manual or Automatic mode
* Hydraulic Swing Away
* Dead or Live Center
* Claim Shell Support for Max 8" Diameter Shaft

Standard Equipment:
* Single stanchion machine assembly with external cutting head
* Fanuc 18i Model B pendant 4 axis control with gear cutting software
* Oil recirculation system with filtration for cutting head
* Hydraulic Oil Chilling System
* Gashing Arbor
* Chip Conveyor
* Tailstock
* Half Cabin Enclosure
* 500lb Jib Crane
* Set of Leveling Blocks
* Machine Painted to Customer's Specifications (2 Colors).
* Standard safety guarding and warning labels.
* 2- sets documentation (hydraulic, electrical, and operator)

Control Features:
* C-Axis work table rotation
* X-Axis radial infeed
* Z-Axis axial feed
* A-Axis cutter rotation
* Custom Macro screens for easy conversational programming
* One to 3 cuts can be selected
* Crowning amounts are input by the desired amount on the flank of the gear
* Single index Milling
* Control of separate entering and exiting feed rates to optimize cycle times and cutting loads
* Selection of tailstock functions via m code
* Programmable taper cutting
* Sizing cycle feature used to make corrections to the size of a part without running through a comp
ete multi cut cycle
* Part programs can be stored in nonvolatile memory with up to 15 characters
* RS-232, S Ram, and Ethernet communication ports. (S Ram card included)

Machine Design Features:
* Base and Column are cast Iron construction with new design improvements to maximize stiffness.
* All slide ways are hardened and ground to precision standards for accurate dependable motion and l
ng life.
* All Axes are digitally driven with separate servo drives and absolute value encoders providing pre
ision location at all times.
* Axis ball screw are 80mm by 10mm pitch.
* The work table is designed for maximum stiffness with hydrostatic bearing surfaces supporting the
ork piece loads. Table rotation powered by a separate servo drive system utilizing a worm gear desig
. Table position is maintained with an absolute value encoder.
* The slide ways and all other lubrication points, with exception of the cutter heads, are lubricate
by an automated forced pressure lubrication system.
* The lubrication reservoir is designed for visual observation and also has an alarm system to assur
maintenance of the lubrication levels.
* The cutter head is lubricated with a re-circulating oil bath. The oil bath recirculation system is
a free standing above floor system servicing only the cutter heads. The re-circulation system includ
s filtration and oil temperature control for consistent predictable performance and long life of the
cutter head gear drives.
* Self contained hydraulic system for hydraulic counter balancing of the cutter saddle, and table br
king.

GENERAL TERMS AND CONDITIONS:

Delivery:
* 1 month from the receipt of purchase order and deposit

Transportation:
* Machine is sold FOB RP Machine Statesville NC.
* CIF quotes available upon request

Runoff Criteria:
* To be determined

Installation and Training:
* This price includes the services of a factory service engineer to assist customer in set-up of mac
ine in the US only. International installation will be quoted at additional cost. The customer is re
ponsible for machine foundation, rigging machine in place and supplies all hook ups to power, air, a
d water. The factory service engineer completes installation with customer supplied assistance. The
actory service engineer completes demonstration of the machine run-off, capabilities and operator in
truction for a period of not to exceed 10 working days. Extended service is available at our normal
ervice rates in effect at the time of installation.

Warranty:
* One (1) Year Warranty on Parts and Labor
* Fanuc Controls, motors, and drives are supported with a two (2) year Mfg. part warranty

Validity:
* This quotation is valid for 30 days and subject to availability

Payment:
50own payment with Purchase Order
40%pon successful runoff at RP Machine
10%et 30 days from Receipt of Machine

UED-ed is published by
Used Equipment Directory 400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com, Tel: 973-400-1790 Fax: 973-625-8933