R P Machine Enterprises Inc
820 Cochran St
Statesville
NC
28677-3731
Tel: 704-872-8888
Fax: 704-872-5777
sales@rpmachine.com www.rpmachine.com
RPM, No. GS1500, Fanuc 18i M, RPM Model GS1500 New Gear Shaper with Fanuc 3- Axis Control, 60'' Dia, 12'' Str
[2423]
Machine Specifications:
Maximum Workpiece Diameter (External) 60''
Maximum Workpiece Diameter (Internal) 68''
Maximum Throat Distance 24"
Maximum DP 2.1DP
Maximum Stroke Length 12"
Maximum Stroke Speed 180
Minimum Stroke Speed 30
Distance from Cutter Spindle Nose to Worktable Face 8.26"-21.25"
Distance from Cutter Center to Worktable Center 5.90"-31"
Diameter of Cutter Spingle 4.72"
Diameter of Worktable 46.8"
Diameter of Worktable Hole 11"
Column offset for oblique cutter relieving .98"
Cutter Spindle Diameter-off at its up-most position 0.275"
Maximum Rotate Speed of Cutter 8.3 rpm
Maximum Rapid Travel of Worktable per Minute 78"/min
Maximum Rapid Travel of Worktable 2rpm
Main Drive Motor (power) 22kw
Power Requirement 480V
Dimensions (L x H x W) 177.1"x157.4"x137.8"
Machine Net Weight, Approx. 39,656 lbs
Standard Equipment:
* Single stanchion machine with table group and upper saddle
* Fanuc 18i M 3 Axis control
* Hydraulic and lubrication system
* Spur guide (helical guides available)
* Cutter spindle back off cam
* Electrical panel with A/C unit
* Hydraulic oil chiller
* Coolant tank with chip conveyor
* Half cabin enclosure
* One standard cutter adapter
* 2 sets documentation (hydraulic, electrical, and operator)
* Machine leveling pads
Control Features:
* C-Axis work table rotation (no change gears required)
* X-Axis work table infeed
* B-Axis cutter spindle rotation
* Cutter at top feature
* Custom Macro screens for easy conversational programming
* One to five cuts can be selected
* Segment cutting
* Single index and/or slot cutting
* Sizing cycle feature used to make corrections to the size of a part without running through a comp
ete multi cut cycle
* Part programs can be stored in nonvolatile memory with up to 15 characters
* RS-232, S Ram, and Ethernet communication ports. (S Ram card included)
Paint:
* Standard R.P. Silver/White on Blue
Optional Equipment:
* Riser blocks POR
* Cutter adapters $ POR
GENERAL TERMS AND CONDITIONS:
Delivery:
* 1 month from the receipt of purchase order and deposit
Transportation:
* Machine is sold FOB RP Machine Statesville NC.
* CIF quotes available upon request
Runoff Criteria:
* To be determined
Installation and Training:
* This price includes the services of a factory service engineer to assist customer in set-up of mac
ine in the US only. International installation will be quoted at additional cost. The customer is re
ponsible for machine foundation, rigging machine in place and supplies all hook ups to power, air, a
d water. The factory service engineer completes installation with customer supplied assistance. The
actory service engineer completes demonstration of the machine run-off, capabilities and operator in
truction for a period of not to exceed 5 working days. Extended service is available at our normal s
rvice rates in effect at the time of installation.
Warranty:
* One (1) Year Warranty on Parts and Labor
* Fanuc Controls, motors, and drives are supported with a two (2) year Mfg. part warranty
Validity:
* This quotation is valid for 30 days and subject to availability
Payment:
50own payment with Purchase Order
40%pon successful runoff at RP Machine
10%et 30 days from Receipt of Machine
For information on a specific piece of equipment, please contact the selling dealer directly.
UED-ed is published by
Used Equipment Directory
400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
