R P Machine Enterprises Inc
820 Cochran St
Statesville
NC
28677-3731
Tel: 704-872-8888
Fax: 704-872-5777
sales@rpmachine.com www.rpmachine.com
No. SH-180/300, MAAG,
[2513]
cutter overtravel (approximate) .79"
Work Table
Diameter without Oil Groove 39.38"
Diameter of Worm Wheel 37.8"
Height above bed (approx) 41.6"
Capacity
Maximum Diameter of Shafts through Table Bore 14.17" or 5.31"
Maximum Length of Shafts through Table Bore 8.46" or 18.11"
Maximum Generating Path 9.45" Less Dia of Shaft
Maximum Weight of Gear and Fixture (approx) 17,700 lbs
Cutting Ranges
Maximum / Minimum Stroke of Ram 17.7/2.95"
Cutter in Highest Position Above Table at
middle of stroke 51.2"
Cutter in Highest Position Above Table at
middle of stroke when using turable cutter
holder DS 49.4"
Cutter in Lowest Position Above Table at
middle of stroke:
For Gear Diameters Smaller than 42.2" 5.12 1/2 stroke
For Gear Diameters Exceeding 42.2" 3.15"
Maximum Generating Path of Table (approx) 33.5"
Speed and Feed
The speed is adjustable in 12 steps from 4.5 to 107 strokes per minute.
The feed is infinitely variable from 10 to 120 strokes per divison.
Drive
Power required by main drive motor 14-15 HP
Power required by table adjusting motor 1.5 HP
Power required by swivel head motor 0.7 HP
Power required by lubricating oil pump motor 0.7 HP
Power required by cooling oil pump motor 0.7 HP
Dimensions 18/117.3/127"
Weights 41,300
UED-ed is published by
Used Equipment Directory
400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
