December 2014
Used 1000 TON SCHLOEMANN SIEMAG OPEN DIE, HYDRAULIC FORGING PRESS                                                                                                     UED

National Machinery Exchange
158 Paris St
Newark NJ 07105-3833
Tel: 973-344-6100 Fax: 973-589-0944
sales@nationalmachy.com  www.nationalmachy.com

1000 TON SCHLOEMANN SIEMAG OPEN DIE, HYDRAULIC FORGING PRESS [109687]

1000 TON SCHLOEMANN SIEMAG OPEN DIE, HYDRAULIC FORGING PRESS


2 POST FRAME
WORKING PRESSURE..... 315KP/CM2
PRESSING CAPACITY..... 1000MP
RETURNING CAPACITY.... 240MP
PISTON STROKE...... 800MM
DAYLITE (MAX DISTANCE BETWEEN BED & RAM)..2250MM
DISTANCE BETWEEN POST (BED & RAM AREA). 2000 x 1440MM

3 POSITION SADDLE TRANSFER
STROKE OF SADDLE TRANSFER ARRANGEMENT.... 2 x 900MM

OVERALL HEIGHT OF THE PRESS... 4000MM
OVERALL DEPTH OF PIT.. 5000MM

SPEEDS:
APPROACH SPEED, CAPACITY OF PRESS.... 250 MM/S
MAX. PRESSING SPEED........... 110MM/S
RETURN SPEED...... 250MM/S

HIGH PRESSURE:


(1) HIGH PRESSURE OIL PUMP DRIVE FOR DIRECT START OF THE PRESS, CONSISTING OF:
(3) MAIN HYDRAULIC, HIGH PRESSURE OIL PUMPS
MAKE WEPUKO
TYPE RADIAL PISTON PUMP #RP-315-500, ADJUSTABLE
FLOW VOLUME.. 200KP/CM2 - 715 L/MIN. (EACH PUMP)
FLOW VOLUME...315 KP/CM2 - 450 L/MIN. (EACH PUMP)
SPEED...... 750 RPM (EACH PUMP)
MOTOR DRIVE .. 260 KW X (3)

EACH OIL PUMP EQUIPPED WITH:
(1) LUBRICANT PUMP
(1) PRESSURE SENSOR
(1) ROTATING DEVICE
(1) SAFETY VALVE
(1) ONE WAY VALVE

(2) FILLING PUMPS
WORKING PRESSURE...... 4KP/CM2
CONVEYING CURRENT.... 1300 L/MIN
MOTOR DRIVE CAPACITY... 22KW
SPEED...... 3000 RPM

(1) COOLING PUMP
WORKING PRESSURE.. 4KP/CM2
CONVEYING CURRENT.. 1300 L/MIN
MOTOR DRIVE CAPACITY.. 22KW
REVOLUTIONS/MIN... 3000 TURNS/MIN

LOW PRESSURE:

(1) LOW PRESSURE OIL DELIVERY SYSTEM OF THE PRESS, CONSISTING OF:
(1) LOW PRESSURE OIL PUMP
PRESSURE CAPACITY... 100KP/CM2
CONVEYING CURRENT... 180 L/MIN.
CAPACITY NEEDED FOR SHAFT. 37KW
REVOLUTIONS/MINUTE... 1500 TURNS/MIN

EQUIPPED WITH:
(1) TURN VALVE, ELECTRICAL CONTROLLED
(1) PRESSURE SWITCH
(1) SAFETY VALVE WITH NON-RETURN VALVE FOR PUMP CIRCULATION
(1) SAFETY VALVE FOR WORK CIRCULATION

PRESENTLY EQUIPPED WITH:

DANGO & DIENENTHAL FORGING MANIPULATOR
SERIAL No. 1007-8005
MANUFACTURING DATE.. 10/07/1978
CAPACITY. 2500KG.
RAIL TYPE
HYDRAULIC OPERATION
HYDRAULIC LATERAL MOVEMENT
HYDRAULIC ACTUATION OF GRIPPER TONG
HYDRAULIC ACTUATION OF GRIPPER TONG ELEVATION & ROTATION 360o


For information on a specific piece of equipment, please contact the selling dealer directly.

UED-ed is published by
Used Equipment Directory 400 Morris Ave Ste 268, Denville NJ 07834
Robert Scofield, Publisher. Email: bobs@buyused.com, Tel: 973-400-1790 Fax: 973-625-8933