Hildebrand Machinery Co Inc
2023 Black Bridge Rd
York
PA
17402-1934
Tel: 717-846-2600
Fax: 717-845-9497
sales@hildebrandmachinery.com
www.hildebrandmachinery.com
500 Ton, Cincinnati 19 Series x 12", mech., 14'8" bed & ram, 2 spd trans, Hurco 7 cnc back gage
[07093]
Stock # 07093-P
14' X 500 TON CINCINNATI MECHANICAL PRESS BRAKE
Serial # 30348 New 1957 Model # 19 Series x 12'
500 Ton Rating at Bottom of Stroke
335 Ton Rating at Mid Stroke
Bed & Ram Length: 14' 8-1/4"
Bed Size: 8" Wide x 14' 8-1/2" Long with 1/2" Tang Slot
Distance Between Housings: 12' 11-1/2" (155-1/2")
Material Bending Capacity: 3/8" x 14', 1/2" x 10', 5/8" x 6'
Stroke of Ram: 4"
Power Ram Adjustment: 8"
Maximum Pinching Capacity: 330 Ton
Maximum Stripping Load: 33 Ton
Maximum Eccentric Load Capacity: 500 Ton
Machine Stand: 11' 3-1/2" Above Floor Line
Machine Side Frames Extend 6" Below Floor Line
Machine Bed Extends 40" Below Floor Line
Recommended Floor Pit Size: 14" F-B x Wide x 44" Deep
Machine is 111-1/2" Overall Front to Back
Centerline of Bed to Machine Frame (Gap): 14-1/4"
Die Space: 14" (Stroke Down Adjustment Up) Approx.
Approx. Pit Required for Machine Side Frames: 56" F-B x 7" Wide x 7" Deep
Approx. Pit Required for Bed Plate: 5" Wide x 177" Long x 42" Deep
EQUIPPED WITH:
2-Speed Transmission
Motorized Ram Adjustment Motor with Internal Brake
Ram and Bed Machined for Small Angles (No Angle Plates)
Has All Upper Die Clamps Except for a 5" Space
Side Frame Mounted Tonnage Pressure Indicator Gage
Twin End Drive with Gear Guards
(2) Automatic Lubrication Systems
(4) 24" Long Front Mounted Work Support Arms
Air Actuated Mechanical Friction Clutch
Moveable Foot Pedal Activation Control
Light Safety System
Hurco Model # 7 CNC Single Axis Back Gage,
Serial # HFAA9030125B, Wired for Single Phase, 115 Volts
(1) 1-1/4" x 3-3/4" x 151-3/4" Long V Punch Die (No Bottom Mate)
(1) 3-3/8" x 3-3/8" x 14' 1-1/4" Long 4-Way Bottom Die
(1) 14' Long Lower Adjustable Die Holder Rail 4" Wide x 2-3/4" High with
1/2" Slot and Tang
(2 Pieces) Male & Female Die, 3-1/4" Wide x 146-1/4" Long with
(2) U-Shaped Forms
Have Machine Floor Plan Drawing, Parts & Operations Manual and Electrical
Schematic
25 HP Main Drive Motor
4 HP Ram Adjustment Motor
Wired for 3 Phase, 60 Cycle, 220/440 Volts
Floor Space: 10' x 16' x 11' 3" Height Above Floor Approx.
Total Weight: 74,000 Lbs.
Weight Machine with Ram but Bed Off: 55,000 Lbs.
Weight of Bed Section: 19,000 Lbs
(2) I-Beam Sections have been Welded Inside the Frames for Moving Supports
Loaded on Truck, Our Warehouse, York, PA
UED-ed is published by
Used Equipment Directory
45 Eisenhower Dr 5th Fl, Paramus NJ 07652
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 973-400-1790 Fax: 973-625-8933
|
