Gibbs Machinery Co
21500 Hoover Rd
Warren
MI
48089-3160
Tel: 586-755-5353
Fax: 586-755-0304
sales@gibbsmachinery.com
www.gibbsmachinery.com
Diedesheim No.LSA94-2R, Tooled For T's And Elbows, 7 Sta., Tons Of Tooling,#3878
[3878]
EQUIPPED WITH:
Operators Manuals Electrical Diagrams
(22) Extra Master Leadsrews (24) Extra Change Gears
(2) Boxes (Approx. 40" x 40" x 30") Full Of (4) 2 Jaw Chucks
Tooling, Bore & Tap Tools, Chuck Jaws
(1/2) Box (40" x 40" x 30") Of New Spare Parts Namco Dieheads
SPECIFICATIONS:
STATION OPERATION UNIT UNIT HP SPINDLE SPEEDS
1 Right Boring HYP 90/21 7.5 KW (6) 180-560
1 Left Boring HYP 90/22 w/ 7.5 KW
Taper Turning
2 Radial Threading HYP 90 w/Thread- 7.5 KW (6) 45-140
ing Equipment
3 Left Threading HYP 90 w/Thread- 7.5 KW (6) 45-140
ing Equipment
3 Radial Boring HYP 90/23 7.5 KW (6) 180-560
3 Right Threading HYP 90 w/Thread- 7.5 KW (6) 45-140
ing Equipment
4 Load/Unload
Machine is w/Hydraulic Units & Electrical Panel, oil mist lube as taken from
service.
LAS-90-3 Boring Unit:
Drive Capacity .................. 11 KW
Stroke (Of Quill) ............... 150 mm Max.
Feed Thrust ..................... 1850 Kg Max.
Feed Rate: 10 - 200 mm/min. When Fitted w/Throttle DU1
Feed Rate: 10 - 600 mm/min. When Fitted w/Throttle DU3
Tool Adaptor: ISA 50
Adjustment of Unit (Range) ...... 125 mm
The Unit is Controlled Electro-Hydraulically. The 5 Limit Switches Actuate
the Solenoid Valves at the Hydraulic Group Which Controls the Movement of the
Unit.
Limit Switch 1: Rear End Position Control
Limit Switch 2: Unit Stop
Limit Switch 3: Change From Rapid To Feed
Limit Switch 4: Front End Position Control
Limit Switch 5: Special Sequence (e.g. Recessing/Fine Feed)
HYP 90 Boring Unit w/Threading Equipment:
With the Aid of this Equipment, it is Possible to use a Boring Unit HYP 90 for
Producing Threads of Different Leads by Applying Rapid Forward & Return
Traverse.
The Lead of Individual Threads is Obtained by Using Interchangeable Lead
Screws.
The Stroke (Both Rapid & Threading), which can be Utilized in Threading, is
Approximately 130 mm. Maximum Spindle Speed for Threading is 140 RPM.
F.O.B., Truck, Warren, MI
UED-ed is published by
Used Equipment Directory
45 Eisenhower Dr 5th Fl, Paramus NJ 07652
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 201-845-2452 Fax: 201-845-2496
|
