Belyea Co Inc
2200 Northwood Ave
Easton
PA
18045-2239
Tel: 610-515-8775
Fax: 610-258-1230
info@belyeapower.com
www.belyeapower.com
9400 KW, Inlet 900 PSIG @ 825 DEG. F, 12000 V/3/60 HZ, FUJI, 1800 RPM - 1
[26985]
.
TURBINE
Manufacturer: Fuji
Type: Single Casing Extraction
Condensing Type
Rated Output: 9,400 kW
Main Steam Pressure at
Main Stop Valve: 900 PSIG
Temperature: 825 Deg. F
Condenser Vacuum: 1.227 PSIG (2 1/2" hga)
Rated Speed: 5,985 RPM
Extraction Pressure at Turbine Outlet -
No. 1 Extraction: 163.5 PSIG
No. 2 Extraction: 135 PSIG
No. 3 Extraction: 60 PSIG
Measurements -
Piping for the main steam line: 6 inch
Piping for the 1st extraction point: 6 inch
Piping for extraction points 2 & 3: 4 inch
Exhaust: Rectangular 76" by 35" shroud down to
a 48" circular adapter to the
condenser
REDUCTION GEAR
Type: Double Helical
Speed: 5985/1800 RPM
AUXILIARY EQUIPMENT
Main Oil Tank Capacity: 2456 gallons
Main Oil Pump -
Type: Centrifugal
Capacity: 542 GPM
Speed: 3600 RPM
Motor: AC Motor
Emergency Oil Pump -
Type: Centrifugal
Capacity: 146 Gallons
Speed: 1750 RPM
Motor: DC Motor
Oil Cooler -
Type: Shell and Tube (Vertical)
Cooling Water Flow Rate: 200 GPM
Oil Tank Vapor Extractor -
Type: Electric Turbo Blower
Capacity: 348 CFM
CONDENSING TURBINE GENERATOR
Manufacturer: Fuji
Type: Horizontal Cylindrical
Revolving Field Totally
Enclosed
Output: 11,750 KVA
Voltage: 12,000 Volts
Current: 565 Amps
Number of Phases: 3
Number of Poles: 4
Frequency: 60 Hertz
Speed: 1800 RPM
Exciting System: Brushless Exciting System
Cooling System: Totally Enclosed
Water-Air-Cooled
Brushless Exciter -
Output: 82 Kw
Voltage: DC 195 Volts
Current: DC 421 Amps
Speed: 1800 RPM
Number of Poles: 12
Permanent Magnet Generator -
Output: 3 KVA
Voltage: 220 Volts
Current: 7.87 Amps
Speed: 1800 RPM
Condenser -
Manufacturer: Basco
Type: Horizontal, Straight Tube
71.25 x 6 Btu/hr
Size: 29' x 75" Diameter
Steam Flow: 75,000 lb/hr
Exhaust Pressure: 2.5 in. HgA
Cooling Water: 85 Deg. F
Maximum Cooling Water: 9,500 GPM
SPARE PARTS
One Set Bearing Generator
One Set Pad for No. 1 Journal Bearing
One Set Pad for No. 2 Journal Bearing
One Set Pad for Thrust Bearing
One Gland Packing Front (Labyrinth Seal)
One Gland Packing Rear (Labyrinth Seal)
One Journal Bearing No. 1 Turbine
One Journal Bearing No. 2 Turbine
One Set metal Bearing
One Bearing No. 1 Turbine
One Bearing No. 2 Turbine
One Complete Set of Turbine Blades for Last Three Stages
APPROXIMATE WEIGHTS:
Turbine with the gear box - 97,000 lbs.
Generator - 72,000 lbs.
Condenser - 51,000 lbs.
HISTORY:
The turbine generator is presently being stored in its sound insulated
shelter. The system was being turned while under a nitrogen blanket when it
was installed in the plant. The system was removed in 1999 and has had no
long term storage procedures performed on it.
UED-ed is published by
Used Equipment Directory
45 Eisenhower Dr 5th Fl, Paramus NJ 07652
Robert Scofield, Publisher. Email: bobs@buyused.com,
Tel: 201-845-2452 Fax: 201-845-2496
|
